Canon Sl2 Rebel - How to Upload Pictures

Solution

Introduction

Yous tin save images from the photographic camera to a smartphone using the post-obit methods.

●　Connecting via Bluetooth*

When you connect the photographic camera to a Bluetooth-compatible smartphone via Bluetooth, you can institute a Wi-Fi connection by operating only the camera or the smartphone.

Note that pairing between the camera and smartphone is required to connect the camera to a smartphone via Bluetooth.

*This camera is Bluetooth four.1 (Bluetooth depression energy technology) compliant. To connect, your smartphone must be uniform with Bluetooth depression energy technology.

●　Connecting via NFC

NFC-uniform smartphones can be connected via Wi-Fi by touching them to the camera.

●　Connecting with the < > button

This camera enables you to establish a Wi-Fi connection by displaying the Wi-Fi function menu with the　< > push.

Important

• Before connecting to the camera, you must install the complimentary dedicated Camera Connect app on the smartphone.
• Make sure that the smartphone's Wi-Fi part is on.

Preparation: Installing Photographic camera Connect on a Smartphone

To connect the photographic camera to a smartphone, a smartphone on which Android or iOS is installed is necessary. In addition, the defended application Camera Connect (free of charge) must be installed on the smartphone.

• Camera Connect can exist installed from the Google Play or App Store.
• When an NFC-compatible smartphone is touched to the photographic camera before installing Camera Connect, the download screen of Camera Connect will be displayed on the smartphone.

IMPORTANT

• For the operating system versions supported by Camera Connect, refer to the "Related information" section below.
• Interface or functions of the camera and Photographic camera Connect are subject to change for firmware update of the camera or awarding update of Camera Connect, Android, iOS, etc. In such a case, features of the photographic camera or Camera Connect may differ from sample screens or functioning instructions in this manual.

Step 1: Basic Camera Settings

Configure necessary settings before using the wireless LAN functions of the camera.

one. Turn on the camera.

• Set the camera'south power switch to <ON>.

2. Press the < > button.

3. Select [Wi-Fi settings].

4. Select [Wi-Fi].

5. Select [Enable].

6. When the screen below appears, printing < >.

vii. Enter the nickname. You lot can enter whatsoever characters between 1 to 8 characters in length.

When you terminate entering characters, printing the <MENU> button.

*For more information on using the keyboard, refer to "Functioning Reference: Virtual Keyboard Functioning".

Note

When making Wi-Fi settings for the first time, a screen will appear for you to register a nickname for the camera (for identification).

This nickname will be displayed on the screen of target devices when connecting to other devices via Wi-Fi. Be sure to prepare a nickname as otherwise you cannot go to the wireless LAN settings screen.

viii. When the screen below appears, select [OK], then printing < >.

To get back to the screen that was displayed when you pressed < >, press the <Card> button.

9. The [Wireless communication settings] screen will appear.

This concludes the explanation for basic camera settings.

Depending on the connection method, cull i of the following and proceed to:

• Step 2-A: Connecting via Bluetooth
• Stride 2-B: Connecting via NFC
• Step two-C: Connecting with the Wi-Fi button

Pace 2-A: Connecting via Bluetooth

IMPORTANT

• This photographic camera is Bluetooth 4.one (Bluetooth depression energy technology) compliant. To connect, your smartphone must be compatible with Bluetooth low energy applied science.
• Pairing is not possible while shooting with the camera.
• The photographic camera cannot be connected to two or more devices at the same fourth dimension via Bluetooth.
• Bluetooth connection consumes battery power fifty-fifty later on the camera's auto ability off has activated. Therefore, the bombardment level may be depression when yous apply the camera.

2-A-1. Select [Bluetooth function].

2-A-2. Select [Bluetooth part].

2-A-3. Select [Smartphone].

NOTE

< > will appear on the camera'southward LCD monitor.

ii-A-4. Select [Pairing].

2-A-5. Select [Exercise not brandish].

Pairing will start.

2-A-6. Enable the Bluetooth function on the settings screen of the smartphone, then commencement Camera Connect.

two-A-vii. Select the camera to pair with.

• Tap on the nickname of the camera to be paired.

• iOS: When the screen below appears, tap on [Pair].

2-A-8. Select [OK].

: The device name set on Camera Connect

2-A-9. Press < >.

Pairing volition consummate and the camera will exist continued to the smartphone via Bluetooth.

Proceed to "Step three-A: Sending Images to a Bluetooth-compatible Smartphone".

Stride ii-B: Connecting via NFC

Important

• The camera cannot exist connected to two or more smartphones at the same fourth dimension.
• When touching the smartphone to the camera, be conscientious not to drib the camera or smartphone.
• Practise not affect the smartphone to the photographic camera with as well much forcefulness. Doing so can scratch the camera or smartphone.
• Only property the smartphone close to the camera may not plant a connection. Be certain to touch the photographic camera with the smartphone so that they come up into contact with each other.
• Recognition may exist difficult depending on the smartphone. Bear upon slowly while changing the position or rotating horizontally. If connexion is not established, go on the camera and smartphone together until the camera screen is updated.
• Another application on the smartphone may start depending on how y'all touch. Check the position of the mark, then impact once more.
• When touching the smartphone to the camera, practise not leave anything between the camera and smartphone. In addition, when a case is attached to the camera or smartphone, Wi-Fi connection with the NFC function may not be possible.
• A Wi-Fi connexion cannot be established with the NFC office between this camera and a smartphone while they are connected via Bluetooth.
• To connect this camera to an NFC-compatible smartphone via Wi-Fi, the smartphone'south Wi-Fi and NFC functions must be enabled.

• A Wi-Fi connection cannot be established with the NFC function betwixt this camera and some other NFC-compatible device such every bit a camera or printer.
• A Wi-Fi connection cannot be established with the NFC function while shooting with this camera, when at that place is no carte du jour, when the LCD monitor is closed with the screen facing inward, or while the camera is continued to another device with an interface cable.

2-B-ane. Enable the NFC function on the camera and smartphone.

two-B-2. Touch a smartphone to the camera.

Annotation

When a bulletin indicating the connexion is being established is displayed on the camera's LCD monitor, move the smartphone away from the camera.

Camera Connect starts on the smartphone and establishes a connection.

ii-B-3. When a connection is established, the screen below volition appear on the camera'due south LCD monitor.

Select [OK] and press < >.

: The device name set on Camera Connect

2-B-iv. A bulletin indicating that the connection has been established is displayed and the [ Wi-Fi on] screen is displayed.

NOTE

If the camera screen switches during the smartphone operation procedures, press the < > button to render to the [ Wi-Fi on] screen.

Proceed to "Stride 3-B: Viewing and Saving Images with a Smartphone".

Step two-C: Connecting with the Wi-Fi Button

2-C-ane. Select [Wi-Fi function].

2-C-2. Select [ ] (Connect to smartphone).

2-C-3. Select [Register a device for connection].

2-C-four. Select [Do not display].

2-C-5. Check the SSID and countersign.

NOTE

"_Canon0A" is displayed at the end of the SSID.

two-C-half-dozen. Operate the smartphone to establish a Wi-Fi connexion.

2-C-7. When the [Waiting to connect] screen is displayed on the photographic camera's LCD monitor, start Camera Connect on the smartphone.

2-C-8. Select and tap on the photographic camera to connect to via Wi-Fi from [Cameras] on Photographic camera Connect.

2-C-9. When a connection is established, the screen below will appear on the camera's LCD monitor.

Select [OK] and printing < >.

: The device name set up on Camera Connect

2-C-10. A bulletin indicating that the connection has been established is displayed and the [ Wi-Fi on] screen is displayed.

NOTE

If the photographic camera screen switches during the smartphone operation procedures, press the < > push button to return to the [ Wi-Fi on] screen.

Go on to "Step 3-B: Viewing and Saving Images with a Smartphone".

Step 3-A: Sending Images to a Bluetooth-uniform Smartphone

3-A-1. Touch [Images on camera] in Photographic camera Connect.

• Android: When yous select [Images on camera] in Photographic camera Connect, a Wi-Fi connection will be automatically established.
• iOS: On the smartphone's Wi-Fi function screen, select the SSID (network proper name) and countersign displayed on the camera to establish a connection.

3-A-2. The [ Wi-Fi on] screen will announced.

Note

If the camera screen switches during the smartphone operation procedures, press the < > button to render to the [ Wi-Fi on] screen.

3-A-three. Operate the smartphone to ship images stored in the camera to the smartphone.

When a list of images in the camera appears on the smartphone, tap [Select] on the upper right of screen.

three-A-4. When the selection screen appears, choose the desired images ( ), then touch [Save] [ ] ( ). The selected images will be saved to the smartphone.

3-A-5. Later the images have been sent, tap on [ ] on the upper right, and so affect [ ] on the upper left of the screen to return to the carte.

three-A-half-dozen. To finish the Wi-Fi connexion, tap on [ ] on the upper right, then touch [Aye].

NOTE

• To terminate the Wi-Fi connectedness, perform either of the following operations.

- On the smartphone'due south Camera Connect screen, tap on [ ].

- On the camera'due south [ Wi-Fi on] screen, select [Disconnect, leave].

• Terminating the Wi-Fi connexion will switch the camera to the Bluetooth connection.
• You can cheque the connection status on the Camera Connect main screen:

IMPORTANT

• With a Wi-Fi connection to a smartphone established, certain functions are unavailable.
• Depending on the communication condition, epitome display may be delayed.
• When saving images to a smartphone, you cannot take a pic fifty-fifty if you lot press the camera's shutter button. Also, the camera's LCD monitor may turn off.

NOTE

• The Wi-Fi connectedness will be terminated if yous prepare the camera's ability to <OFF> or open the card slot/bombardment compartment cover.
• RAW images cannot be saved to a smartphone. When a RAW image is selected, it volition exist saved as a JPEG paradigm.
• With a Wi-Fi connectedness established, the camera'southward auto power off does not office.
• With a Wi-Fi connection established, disabling the smartphone'southward power saving office is recommended.

Pace 3-B: Viewing and Saving Images with the Smartphone

3-B-1. Touch [Images on camera] in Camera Connect.

iii-B-2. Use your smartphone to import images from the photographic camera to the smartphone.

When a list of the images on the camera appears on the smartphone, tap [Select] on the upper right of the screen.

3-B-3. When the pick screen appears, cull the desired images ( ), and and so touch [ ] ( ) on the bottom correct of the screen. The selected images will be saved to the smartphone.

iii-B-4. After the images have been saved, bear upon [ ] on the superlative right, and then bear on [ ] on the upper left of the screen to return to the menu screen.

iii-B-5. To stop the connection, impact the [ ] icon on the upper right of the screen, so tap [YES] when the confirmation screen appears.

*Android™, and Google Play™ are trademarks of Google Inc.

Performance Reference: Virtual Keyboard Functioning

For details on keyboard performance when registering camera'south nickname, refer to the post-obit.

You can modify the nickname later on the [Wireless communication settings] screen.

warrendarry1986.blogspot.com

Source: https://in.canon/en/support/8203566000

Share this post